Tattoo artists transform pencil tattoo designs into tattoo guides using tattoo transfer paper. Typically, tattoo designs are transferred to your skin using a thermographic technique on tattoo transfer paper. For some crafts, you can also use printed tattoo transfer paper.
Papers for thermographic transfers
Create the tattoo you want in pencil. Make a sketch of the tattoo design you desire on a standard piece of printer paper. It should resemble your tattoo perfectly since that is how it will appear when transferred to the transfer paper.
Place the carbon paper on top of the original artwork. The thermographic transfer paper consists of three sheets: an undersheet, a black carbon copy, and a top sheet with the carbon copy. Under the carbon paper and on top of the under the sheet, put a piece of paper with your original design.
The full set of sheets should be transferred using a thermographic transfer maker. A tattoo parlor could have this kind of gear. Some print shops could also carry the transfer maker you want. Depending on the type of model maker you have, papers are fed in in a different method, but drawings should always be positioned face down.
Take the top carbon copy, make a carbon duplicate of it, and then take it off the other transfer paper. After passing the transfer paper through the transfer maker, the top piece of carbon paper will be an exact reproduction of your original design. You should rip out the carbon copy from the transfer paper.
Wherever your customer wants their tattoo to be should be marked on the copied copy. Before you get your design precisely where your consumer wants it, you might need to attempt it multiple times. Make sure they are satisfied with the employment offer.
Wash the skin of your client with soap and water. Prepare a bubble-producing solution of soapy water. You can utilize mild dish soap. Use a towel soaked in soapy water to gently rub the area of the skin where the tattoo will be applied.
To the skin of your customer, apply the carbon copy. Wet your client’s skin and reposition the tattoo by using soapy water. After placing the carbon duplicate, get your client’s blessing. With your hands, totally smooth it out. To guarantee that the design is transferred, press down.
Take the carbon copy out. When you remove the carbon copy from your client’s skin, you should be able to view the transferred design. Because the design might not be visible in all areas, carefully set the carbon copy down again and apply additional pressure.
Repeat these procedures if your client is unhappy with the positioning. After transferring the design, get your client’s permission. If your customer isn’t pleased, wipe down their skin with a cotton ball and rubbing alcohol. Repeat the procedure to apply a fresh carbon duplicate of the design on your client’s skin.